Electronic Components

ABX00027

SBC, Arduino Nano 33 IOT, SAMD21G18A, 32bit, 32KB RAM, 256KB Flash, 14 I/O pins

RC0603FR-071KL

SMD Chip Resistor, 1 kOhm, 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose

RC0603FR-0710KL

SMD Chip Resistor, 10 kOhm, 1%, 100 mW, 0603 [1608 Metric], Thick Film, General Purpose

GRM188R72A104KA35D

0603 0.1 uF 100 V 10 % Tolerance X7R SMT Multilayer Ceramic Capacitor

LM3886TF/NOPB

68W, 1 Ch, 20-94V supply stereo Class-AB amplifier w/ Mute 11-TO-220 0 to 70

ESP32-C6-DEVKITC-1-N8

Development Board ESP32-C6-WROOM-1/U

PG164150

Microchip Technology MPLAB PICkit 5 In-Circuit Debugger

ABX00046

SBC, Arduino Portenta H7 Lite Connected, STM32H747XI, 32bit, ARM Cortex-M7, 8MB RAM, 16MB Flash

AFX00005

Opta Ext D1608E (with Electromechanical Relays) Digital Expansion | Arduino AFX00005

STLINK-V3SET

STLINK-V3 Modular In-circuit Debugger/programmer Evalaution Board for STM32/STM8

ABX00052

Raspberry Pi RP2040 Microcontroller Development Board 133MHz CPU 264KB RAM 16MB Flash

U.FL-R-SMT-1(10)

RF CONNECTOR RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Receptacle

GLYPH-C3-ESP32-IOT-Dev-Board

Ultra-compact (50.8 × 22.8 mm) ESP32-C3 board with 160 MHz RISC-V core, 400 KB SRAM,4 MB flash, Wi-Fi (802.11 b/g/n) & Bluetooth 5. Includes 15 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial, onboard LiPo charging, and Glink connector for QWIIC/STEMMA QT sensors.

GLYPH-H2-ESP32-IOT-Dev-Board

Compact (50.8 × 22.8 mm) ESP32-H2 board with 160 MHz RISC-V core, 320 KB SRAM, 4 MB flash. Supports Zigbee 3.0, Matter, Bluetooth 5.3, with 19 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial. Built-in LiPo charger and Glink connector for QWIIC/STEMMA QT sensor compatibility.

GLYPH-C6-ESP32-IOT-Dev-Board

Compact (50.8 × 22.8 mm) ESP32-C6 board with 160 MHz RISC-V core, 512 KB SRAM, 4 MB flash. Supports Wi-Fi 6 (802.11ax), Bluetooth 5.3, Zigbee 3.0, plus 21 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial. Includes onboard LiPo charging and Glink connector for QWIIC/STEMMA QT sensor support.

GLYPH-C6-ESP32-IOT-Dev-Board-header

Compact (50.8 × 22.8 mm) ESP32-C6 board with 160 MHz RISC-V core, 512 KB SRAM, 4 MB flash. Supports Wi-Fi 6 (802.11ax), Bluetooth 5.3, Zigbee 3.0, plus 21 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial. Includes onboard LiPo charging and Glink connector for QWIIC/STEMMA QT sensor support.

GLYPH-C3-ESP32-IOT-Dev-Board-header

Ultra-compact (50.8 × 22.8 mm) ESP32-C3 board with 160 MHz RISC-V core, 400 KB SRAM, 4 MB flash, Wi-Fi (802.11 b/g/n) & Bluetooth 5. Includes 15 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial, onboard LiPo charging, and Glink connector for QWIIC/STEMMA QT sensors.

GLYPH-H2-ESP32-IOT-Dev-Board-header

Compact (50.8 × 22.8 mm) ESP32-H2 board with 160 MHz RISC-V core, 320 KB SRAM, 4 MB flash. Supports Zigbee 3.0, Matter, Bluetooth 5.3, with 19 GPIOs, 12-bit ADC, I2C, SPI, UART, USB Serial. Built-in LiPo charger and Glink connector for QWIIC/STEMMA QT sensor compatibility.